A dripping faucet seems to get louder once your house gets quiet. You hear it from the next room, and each drop is water you’re paying for without using.
All these little drops can add up. According to the EPA, a faucet dripping once per second can waste more than 3,000 gallons annually. Fixing a leaky faucet early can save water and bring some quiet back to your home.
Before You Begin
Dripping faucet repair depends on identifying the faucet and using the correct parts. The steps below cover common kitchen and bathroom sink faucets that drip from the spout. Leaks around the base or beneath the sink may need a different kind of service.
Depending on your model, gather a screwdriver, hex key, adjustable wrench, towel, and replacement parts.
1. Identify Your Faucet and Replacement Part
Find your faucet’s brand and model, then look up the manufacturer’s parts diagram and repair instructions.
Some compression faucets use a rubber washer to stop water flow, while others may use a cartridge. Ball and ceramic-disc designs have their own repair procedures. Match replacement parts to the exact model instead of choosing something that simply looks similar.
2. Shut Off the Water
Close both the hot and cold shutoff valves beneath the sink. Open the faucet to release pressure until the water stops flowing.
If a valve won’t move, starts leaking, or fails to stop the water, contact a plumber before taking the faucet apart.
3. Protect the Sink and Organize Your Workspace
Close the drain or cover it with a towel so small screws can’t disappear down the pipe. Set a small tray nearby to organize removed parts.
Take photos as you work. They’ll help you remember how components fit together.
4. Remove the Handle
Follow your faucet’s instructions to find the handle screw. It may sit beneath a decorative cap or require a hex key.
Loosen the screw and remove the handle. Then remove the retaining nut, clip, or other hardware specified in the parts diagram. Use the recommended tools and don’t force anything if components resist normal removal.
5. Replace the Worn Component
The next step depends on the faucet’s design:
- Compression faucet: Remove the valve stem as directed. Unscrew the worn rubber washer from the bottom and replace it with one of the same size and type.
- Cartridge faucet: Note the cartridge’s position before removing it using the manufacturer’s method. Install the matching replacement in the correct orientation.
For ball faucets and other designs, follow the model’s repair-kit instructions. Correct positioning of seals, springs, and retaining hardware matters.
6. Reassemble and Check for Leaks
Reinstall the retaining hardware and handle according to the manufacturer’s instructions. Avoid tightening the parts too hard.
Restore the water supply slowly. Run hot and cold water, then turn the faucet off and watch the spout. Check around the handle, base, and beneath the sink for moisture. If leaking continues, close the supply valves and arrange professional service.
When Is Professional Faucet Repair Worthwhile?
A replacement washer or cartridge won’t solve every leak. A damaged valve seat, worn faucet body, or faulty supply connection may need additional work.
Call a plumber when:
- Shutoff valves leak or won’t close.
- Corroded hardware prevents disassembly.
- The faucet still drips after the correct replacement part is installed.
- Water collects inside the cabinet or damages nearby materials.
- Replacement parts are unavailable or difficult to identify.
Professional help can also save time when you’re unsure whether repairing an older fixture is worthwhile. A plumber can assess its condition and explain repair and replacement options.
Get Help From Tidy Tank
Tidy Tank Plumbing, Sewer, and Septic provides faucet repairs, fixture replacements, and help with leaking plumbing connections in Crystal Lake and nearby communities. Our licensed, bonded, and insured team explains the problem and recommended work before you approve the repair.
Ready to stop the drip? Call (847) 920-8943 or request plumbing service online.